Brake Caliper for TL45, Sting

A factory-specification front caliper for the TL3000 and TL45. Two pistons, banjo inlet fitting, and the mounting hardware included in the box, which makes it a straight replacement after a seizure, a failed piston seal, or impact damage on the trail.

This is the two-piston unit. Talaria trims that left the factory with four-piston front calipers use a different part and different hydraulic volume, so match the caliper to what is already on the bike rather than to the model name alone.

Plan on bleeding the front circuit once the caliper is on. Use DOT 3 or DOT 4 fluid, torque the mounting bolts to the service manual figure, and check lever feel before riding — a caliper bolted up loose will flex under braking.